Produits spécialisés
Produits spécialisés
“Hazardous Locations and Harsh Industrial Environments” typically refers to areas which may contain dangerous and corrosive, explosive or combustible gases, liquids, or dust. Typical applications include mining, petrochemical, and pulp and paper industries. Rex Power Magnetics has been designing and producing a line of dry type transformers for Hazardous Locations and Harsh Industrial Environments. Rex’s product offering in this category includes three varieties, known as the HLA, HLB & HLC product lines, which are CSA and UL approved for CLASS I, DIVISION 2, GROUPS A, B, C, & D.
Group A: Atmospheres containing acetylene.
Group B: Atmospheres containing butadiene, ethylene oxide, hydrogen (or gases of vapors equivalent in hazard to hydrogen, such as manufactured gas) or propylene oxide.
Group C: Atmospheres containing acetaldehyde, cyclopropane, diethyl ether, ethylene, hydrogen sulfide, or unsymmetrical dimethyl hydrazine (UDHM), or other gases or vapors of equivalent hazard.
Group D: Atmospheres containing acetone, acrylonitrile, alcohol, ammonia, benzene, benzol, butane, ethylene, dichloride, gasoline, hexane, isoprene, lacquer solvent vapors, naphtha, natural gas, propane, propylene, styrene, vinyl acetate, vinyl chloride, xylenes, or other gases or vapors of equivalent hazard.
*NEW* A variant of Rex’s HLA & HLB transformers is available with IECEx approved CLASS 1 Zone 2 certification. Please contact our sales office for more information on IECEx approved transformers CLASS I, ZONE 2, GROUPS IIA, IIB, IIC
Group II A: Atmospheres containing acetaldehyde, acetone, cyclopropane, alcohol, ammonia, benzene, benzol, butane, ethylene, dichloride, gasoline, hexane, isoprene, lacquer solvent vapors.
Group II B: Atmospheres containing acrylonitrile, butadiene, diethyl ether, ethylene, ethylene oxide, hydrogen sulfide, propylene oxide, or unsymmetrical dimethyl hydrazine (UDHM), or other gases or vapors of equivalent hazard.
Group II C: Atmospheres containing acetylene, carbon disulfide, hydrogen or other gases or vapors of equivalent hazard.
Capacity |
|
Voltage Class | 1.2kV |
Cooling | Self Cooled (ANC) |
Frequency | 60Hz (50/60Hz Optional) |
Conductors | Copper (Cu) or Aluminum (Al) Windings |
Temperature Rise |
|
Insulation System | 200°C |
Impregnation | Core & Coil Are Encapsulated In a Block of Polyurethane and Silica Sand |
Primary Taps | Typically +/-2 x 2.5% Raps (Refer To Dry Type Distribution Transformer Catalog) |
Sound Level | Meets NEMA ST-20 |
Enclosure Type | Type 3R Indoor/Outdoor (Type 4 or IP66 Optional when used with certified watertight conduit hubs) |
Enclosure Finish | ANSI/ASA 61 Grey |
Warranty | 12 Months (See Warranty and Limitations) |
Quality System | ISO 9001:2015 Quality Management System |
Certifications |
|
Reference Standards |
|
Optional Features & Accessories |
|
Capacity |
|
Voltage Class | 1.2kV |
Cooling | Self Cooled (ANC) |
Frequency | 60Hz (50/60Hz Optional) |
Conductors | Copper (Cu) or Aluminum (Al) Windings |
Temperature Rise |
|
Insulation System | 200°C |
Impregnation | Core & Coil As Well As The Connections Between Leads And Coils Are Encapsulated In A Block of Polyurethane and Silica Sand |
Primary Taps | Typically +/-2 x 2.5% Raps (Refer To Dry Type Distribution Transformer Catalog) |
Sound Level | Meets NEMA ST-20 |
Enclosure Type | Type 3R Indoor/Outdoor (Type 4 or IP66 Optional when used with certified watertight conduit hubs) |
Enclosure Finish | ANSI/ASA 61 Grey |
Warranty | 12 Months (See Warranty and Limitations) |
Quality System | ISO 9001:2015 Quality Management System |
Certifications |
|
Reference Standards |
|
Optional Features & Accessories |
|
Capacity |
|
Voltage Class |
|
Cooling | Air Cooled (ANN / AN) |
Frequency | 60Hz (50/60Hz Optional) |
Conductors | Copper (Cu) or Aluminum (Al) Windings |
Temperature Rise |
|
Insulation System | 220°C |
Impregnation | Polyester Resin Dipped and Baked |
Efficiency | Meets North American Energy Efficiency Standards:
|
Primary Taps | Typically +/-2 x 2.5% taps (refer to dry type distribution transformer catalogue) |
Sound Level | Meets NEMA ST-20 |
Enclosure Type | Type 3R Indoor/Outdoor (Type 4 or IP66 Optional when used with certified watertight conduit hubs) |
Enclosure Finish | ANSI/ASA 61 Grey |
Warranty | 12 Months (See Warranty and Limitations) |
Quality System | ISO 9001:2015 Quality Management System |
Certifications |
|
Reference Standards |
|
Optional Features |
|